Gravel Calculator
Estimate the amount of gravel needed for your project.
Cu Yards = Area × (Depth/12) ÷ 27 common.example: 1,000 sq ft at 4" deep ≈ 12.35 cu yd
কোয়ার্টস থেকে কাপ ক্যালকুলেটর
calculate sqft
— cu yd
0500010000
সূত্র: কাপ = কোয়ার্টস × ৪: Cu Yards = Area × (Depth/12) ÷ 27
bar_chart লাইভ রূপান্তর দৃশ্য
Area (sq ft) —
Cubic Yards —
How to Convert
Cu Yards = Area × (Depth/12) ÷ 27 - Enter the area in square feet.
- Default depth is 4 inches.
common.example: 1,000 sq ft at 4" deep ≈ 12.35 cu yd
কোয়ার্ট থেকে কাপ রূপান্তর টেবিল
| Area (sq ft) (sqft) | Cubic Yards (cu yd) |
|---|---|
| 200 | 2.47 |
| 500 | 6.17 |
When to Use This Converter
- check_circle Landscaping and garden beds
- check_circle Driveway base material
সচরাচর জিজ্ঞাসিত প্রশ্ন (FAQ)
How many tons is a cubic yard of gravel?
expand_more
1 cubic yard of gravel weighs approximately 1.4 to 1.5 tons (2,800 to 3,000 lbs), depending on gravel type and moisture content.
How do I calculate cubic yards of gravel needed?
expand_more
Multiply length (ft) × width (ft) × depth (ft) ÷ 27 to get cubic yards. Then multiply by 1.4 to convert to tons.
How deep should gravel be for a driveway?
expand_more
A driveway base usually requires 4 to 8 inches of compacted gravel.
What is the best gravel for drainage?
expand_more
Clean, crushed stone (without fines/dust) is best for drainage projects.
How much does 1 ton of gravel cover?
expand_more
1 ton of gravel covers about 100 square feet at 2 inches deep.
Does gravel compact over time?
expand_more
Yes, you should order 5-10% extra to account for settling and compaction.
What is 'Crush and Run'?
expand_more
A mix of crushed stone and stone dust that compacts into a hard, stable surface.
How many cubic yards in a dump truck?
expand_more
Small trucks hold 5-6 yards; large tri-axle trucks hold 15 to 20 cubic yards.